• Compra una licencia de Windows 10/11 (10€) u Office (18€) al mejor precio u Office al mejor precio. Entra en este post con las ofertas
  • ¡Bienvenid@! Recuerda que para comentar en el foro de El Chapuzas Informático necesitas registrar tu cuenta, tardarás menos de 2 minutos y te dará valiosa información además de ayudarte en lo que necesites o pasar un rato agradable con nosotros.

DRIVER POWER STATE FAILURE , pantallazo azul

antonio18_

Chapucillas
Registrado
31 May 2014
Mensajes
143
Puntos
16
Edad
38
Desde hace unos días, que de repente me deja de ir el teclado por blueetooth y algunos usbs, y de repente me sale pantallazo azul con: DRIVER POWER STATE FAILURE.

Enciendo el bluescreenview y esto es lo que me sale:


Llevo días miradno y no sé que pasa. Todos mis drivers están actualizados, solo tengo uno deshabilitado y que es el blueetoth de la placa base, dado que no me coge el teclado y debo usar un blootooth externo.

Y el crashdump me indica lo siguiente:

Crash Dump Analysis
--------------------------------------------------------------------------------

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.

On Wed 04/02/2015 2:15:10 GMT your computer crashed
crash dump file: C:\Windows\Minidump\020415-9750-01.dmp
This was probably caused by the following module: hal.dll (hal+0x539A)
Bugcheck code: 0x9F (0x3, 0xFFFFE000A6A891D0, 0xFFFFD00112A6A960, 0xFFFFE000B156B940)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\Windows\system32\hal.dll
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Hardware Abstraction Layer DLL
Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.



On Tue 03/02/2015 1:21:35 GMT your computer crashed
crash dump file: C:\Windows\Minidump\020315-9546-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x150AA0)
Bugcheck code: 0x9F (0x3, 0xFFFFE000A5667E20, 0xFFFFD000ADB63960, 0xFFFFE000A56AB010)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
 
Haz un punto de restauración antes y prueba esto después:

  • Arrancar la máquina con el cd de instalación del sistema.
  • Iniciar la consola de reparación siguiendo las instrucciones en pantalla para tal fin.
  • Escribir: attrib -R-H-S C:\boot .ini
  • Escribir: del C:\boot .ini
  • Escribir: bootcfg /rebuild
  • Escribir: fixboot
  • Tras reiniciar el sistema todo debería haber vuelto a la normalidad
 
Prueba lo que te dice nos, pero de todos modos estos "crashes" se deben a problemas/incompatibilidad de drivers, asi que no hay garantia de que no te vuelva a ocurrir si sigues usando los mismos perifericos problematicos... Intenta actualizar los drivers de todos los dispositivos, y si sigue igual la unica solucion sería desinstalar los controladores con errores. Metete en el Administrador de dispositivos y mira a ver cuales son los disposit¡vos que tienen problemas.

Salu2
 
Arriba